Publicité
• Using the smart programme
One week after switching on, the device will apply the new programme for the
following 7 days. Then, week by week, the device will continue to optimize the smart
"automatic" programme and adjust the Comfort and Eco mode period to best fit your
lifestyle.
When the device is in the Freeze Protection or Standby mode for more than 24
hours, the learning and optimization of the smart programme stops: the device
saves the previously recorded programme from the previous week before switching to
the Freeze Protection or Standby mode.
Example 1: If the device is installed in the middle of the season or if it is to be
installed on a construction site, it can be switched on in Standby mode.
When you select the Automatic mode, the learning week will start
automatically. The device will be permanently in the Comfort mode and
will remember your habits so that it can use a customized programme
the following week.
Example 2: Before you leave for your holiday, select the Freeze Protection mode.
Upon your return, when you go back into the Automatic mode, the unit
will automatically use the previously stored smart programme from the
last week before you left.
INTEGRATED WEEKLY AND DAILY PROGRAMME
In this mode, you can programme your device by setting one of the five programmes
for each day of the week.
• Access to the programming mode
From the Auto, Comfort, Eco or Freeze Protection mode, enter the programming
mode by pressing the
Schematic sequence of programming settings:
Time settings
button for 5 seconds.
Day settings
23
Selection of pro-
grammes
EN
Publicité
