Dreve Drufomat scan Mode D'emploi page 33

16. Plates and labels have to be main-
tained in a well legible condition and
must not be removed.
17. Before cleaning and maintenance
of the unit or the exchange of parts the
plug has to be disconnected.
18. The opening of the unit and repairs
are only to be carried out by accordingly
trained experts.
19. Only those appliances and spare
parts may be used which are released by
5. Initiation
Before initiation make sure that the volt-
age indicated on the type plate meets
the voltage of the power source.
Connect the unit to an air compressor.
For that purpose push the pressure hose
that is included in delivery onto the hose
clip (9) of the unit and fix it by means of
a hose clamp. Assemble the fast cou-
pling at the other end of the tube and
connect it with the pressure line.
The pressure of the compressed
air line must not exceed 145 psi.
Put the power cord into the female
connector (33) and create a connec-
tion with the Euro/USA plug.
the manufacturer. We are not responsi-
ble for damages caused by the use of
foreign parts.
20. Arbitrary rebuilding or modifica-
tions are not permitted due to safety
reasons.
21. The required operation and main-
tenance conditions mentioned in these
working instructions are to be complied
with imperatively.
Important: Before the first initiation
please read the working instructions
thoroughly. In case of comprehen-
sion problems contact your responsi-
ble dealer or Dreve Dentamid GmbH,
if necessary.
Scope of delivery
1 x Drufomat scan
1 x drawer for granules
1 x F insert incl. insert bowl and nub
plate
1 x tension ring with exhaust valve
1 x base range of blanks
1 x bowl for granules
1 x power cord
1 x air connection hose incl. hose
clamps and fast coupling
1 x working instruction
33 33