Using The Bluetooth Speaker Via Bluetooth - SilverCrest 273510 Instructions D'utilisation Et Consignes De Sécurité

cable into the USB port on a PC or a USB
adapter (not included in scope of delivery).
Note: The signal LED
will light up red whilst
2
charging and goes out once charging is com-
pleted. The charging time for a drained battery is
approx. 4 hours.
Note: The speaker may be used whilst charging.
However, doing so will at a minimum double the
charging time.
Once charging is complete, remove the micro-
USB plug of the charging cable and close the
protective cover so the device is splash-proof again.
Using the Bluetooth speaker
®
via Bluetooth
®
Establishing a Bluetooth connection:
®
The jack must not be in use when trying to estab-
lish a wireless connection via Bluetooth Standard
3.0.
Press and hold the button until the signal
10
LED flashes blue and a beep sounds. The
2
speaker will now attempt to connect to the play-
back device (e.g. smartphone or computer).
Switch on the playback device and approve the
connection. Please note the requirements of the
software on the playback device. The signal LED
will light up blue and a beep sound.
The speaker identification on the playback device
will be HG00595.
GB/IE 15