Jøtul I 520 Manuel D'installation page 28

ENGLISH
Fig. 12
• Attach and secure the soapstone to the other side of the
frame (see Fig. 10 and Fig. 11).
Fig. 13
B
B
Secure the Jøtul JGFW-5 firewall into position (Fig. 13A) with
•
four screws (Fig. 13B). Note: Screws cannot be used if the
product is to stand against a firewall. The board must then
be glued into place.
28
All manuals and user guides at all-guides.com
Fig.14
•
Fig. 15
A
•
•
A
A
A
A
Insert the screws in the front panels of the soapstone
B
A
Secure the soapstone fronts (Fig. 15A) to the frame with
brackets (Fig. 15 B/C).
Make sure the soapstone fronts is leveled and that it visually
looks correct. If the front panel is too low in relation to the side
panels, this must be corrected by adding a washer between
the front panel and the floor.
B
C