Wolf ICBSRT304 Instructions D'installation page 7

I N S TA L L AT I O N
I N S T R U C T I O N S
B E F O R E
Y O U S TA R T
Check the location where the rangetop will
be installed. The location should be away
from strong draft areas, such as windows,
doors and strong heating vents or fans. Do
not obstruct the flow of air. The area in
which you are installing this appliance must
have an adequate supply of fresh air to
ensure proper combustion and ventilation.
This appliance is not connected to a
combustion products evacuation device.
It shall be installed and connected in accor-
dance with current installation regulations.
Particular attention shall be given to the
relevant requirements regarding ventilation.
All openings in the wall where the rangetop
is to be installed must be sealed.
I N S TA L L AT I O N
S P E C I F I C AT I O N S
Wolf sealed burner rangetops come in
762 mm, 914 mm and 1219 mm widths. Illus-
trations on pages 9– 11 provide the overall
dimensions and installation specifications for
each width of sealed burner rangetop.
Each rangetop is designed to fit between
cabinets set at the distance specified by the
unit. For example, a 914 mm rangetop will fit a
914 mm opening.
IMPORTANT NOTE: Cabinet opening dimen-
sions shown in the Installation Specifications
illustrations must be used. These dimensions
provide for required clearances.
IMPORTANT NOTE: Locate the electrical
supply within dimensions shown in the
Installation Specifications illustrations.
Refer to the Installation Specifications illustra-
tion for your model on pages 9– 11 for the
exact rough opening dimensions and location
of the gas and electrical supply.
7