Publicité
5. OPERATION
Always verify that the device is in impeccable condition before use. Defective parts must
be replaced immediately. Do not use the device if it is defective.
•
The computer will automatically turn on once you press a button on the device.
•
The wireless connection between the training device and the computer will be made
automatically.
•
The computer turns off automatically if you are inactive for a period of 4 minutes.
MODE BUTTON
Press the MODE button to display various values (time → speed → distance
•
→ calories → ODO). The display will show the selected value until the MODE
button is pressed again or the SCAN function is selected. The display will show
"SCAN" when the SCAN function is selected.
PLEASE NOTE
When "SCAN" flashes on the display, all values will be shown in sequence.
•
Press and hold the MODE button for 2 seconds to reset all the values.
On the
computer
SCAN
TIME
SPEED
DIST
CAL
ODO
SP-DB-1100-B-i-IM-V01.indb 33
SP-DB-1100-B-i-IM-V01.indb 33
On the
Meaning
display
SCAN
./.
TMR
Time
SPD
Speed
DIS
Distance
CAL
Calories
ODO
Distance (total)
Explanation
Shows all values in sequence at
5-second intervals
Automatically measures the time as
soon as training begins.
Shows the current training speed.
Shows the distance during training.
Shows the calories consumed during
training. This is an approximate
Shows the distance covered in all
training sessions.
33
value.
19 Aug 2021 5:16:27 pm
19 Aug 2021 5:16:27 pm
Publicité
