Publicité
Wireless temperature & humidity meter / English
Inserting the batteries
Note
Make sure that the surface of the device is dry and the device is switched off.
1. Unlock the battery compartment by turning the lock (5) in away that the arrow points
towards the opened padlock icon.
2. Remove the cover from the battery compartment (4).
3. Insert the batteries (3 batteries of type AAA) into thebattery compartment with
correct polarity.
4. Put the cover back onto the battery compartment.
5. Lock the battery compartment by turning the lock (5) in a way that the arrow points
towards the closed padlock icon.
6
Measurement:
Type
Range
Accuracy
Resolution
Specification:
Bluetooth standard
Transmission power
Radio range
Operating temperature
Storage temperature
Power supply
Device switch-off
Weight
Dimensions
(length x width x height)
Maintenance and repair
Battery change
A battery change is required when the LED at the appSensor flashes red or the sensor
can no longer be switched on. See chapter Operation.
Cleaning
Clean the device with a soft, damp and lint-free cloth. Make sure that no moisture
enters the housing. Do not use any sprays, solvents, alcohol-based cleaning agents or
abrasive cleaners, but only clean water to moisten the cloth.
Repair
Do not modify the device or install any spare parts. For repairs or device testing, contact
the manufacturer.
Wireless temperature & humidity meter / English
Temperature
Humidity
o
-20 to 60
C
0 to 100%RH
o
o
±0.8
C(-20~0
C)
±3.5%RH @20~80%RH
o
o
±0.5
C(0~60
C)
5%RH @0~20%RH&80~100%RH
o
0.1
C
0.1%RH
Bluetooth 4.0, Low Energy
3.16 mW (5 dBm)
approx. 10m (depending on measuring environment)
-20 to 60°C at < 80 % RH (non-condensing)
-10 to 60°C at < 90 % RH (non-condensing)
3 AAA batteries
After approx. 3 minutes without active Bluetooth connection
100g (incl. batteries)
225 mm x 38 mm x 23 mm
7
Publicité
