Publicité
Wireless temperature & humidity meter / English
Display data
When the APP Sensor has been successfully connected to the terminal device,
continuous measurement and display will begin, and all data can be displayed as either a
table (10) or a graph (11).
Press button 8 to switch to table display
Press button 9 to switch to the curve display
Record the measured values:
Record measurements for later evaluation as follows:
1. Click button 6 to bring up the menu (12).
2. Click "Record" and enter the file name to start recording data.
4
8
10
9
11
12
Share data:
All measured data can be saved in PDF, Excel and image formats, And send it by mail.
Share data in the following ways:
1. Click button 7 to bring up the menu (13).
2. Select export to PDF, Excel, or image and send directly via email.
Start-up:
Info
Allow for an acclimatization period of about 10 minutes in the respective measuring
environment prior to the appSensor's measuring operation.
Proceed as follows to start up the appSensor:
1.Rotate the measuring sensor (1) on the tip of the appSensor clockwise by 90°.
The air circulates freely around the measuring sensor ensuring precise measurements.
Wireless temperature & humidity meter / English
12
5
Publicité
