Publicité
Part / Material
Suitable cleaning method
Exterior finish /
¡
stainless steel
¡
¡
¡
¡
Rinse and dry immediately.
Burner grates and
¡
grate bridge /
porcelain enamel on
¡
cast iron
¡
¡
Rinse and dry immediately.
Igniters / ceramic
¡
¡
1
These marks are registered trademarks of their respective owners. All other trademarks are trademarks of BSH Home
Appliances Corporation or its affiliated companies.
Clean with soapy water and soft cloth, then
rinse and dry with a soft cloth.
Condition steel with the Gaggenau Stainless
Steel Conditioner (part # 00576698). Not for
use on black steel.
Hard water spots: Household white vinegar
Mild abrasive cleaners: Bon Ami®
Heat discoloration: Bar Keepers Friend®
Non-abrasive cleaner: Hot water and
detergent, Fantastic®
1
Mild abrasive cleaners: Bon Ami®
1
Scrub®
Stubborn stains: Soap filled steel wool pads
Cleaning in the dishwasher: Remove burnt-
on food prior to placing the burner grates in
the dishwasher. Place the burner grates on
the lowest rack of dishwasher and use the
dishwasher manufacturer's recommended
detergent.
Carefully wipe with a cotton swab dampened
with soap and water.
Gently scrape the soil off with a toothpick.
Important notes
Do not use steel wool pads. They will
¡
scratch the surface.
Stainless steel resists most food stains and
¡
pit marks providing the surface is kept clean
and protected.
Never allow food stains or salt to remain on
¡
1
stainless steel for any length of time
1
Rub lightly in the direction of the grain.
¡
Chlorine or chlorine compounds in some
¡
cleaners are corrosive to stainless steel.
Check the ingredients on the label before
using.
The grates are heavy; use care when you lift
¡
them up. Place them on a protected surface
1
, Soft
for cleaning.
Blisters, crazing or chips are common due to
¡
the extreme temperatures on the grate
fingers and rapid temperature changes.
Acidic and sugar-laden spills deteriorate the
¡
enamel. Remove soil immediately after the
appliance has cooled enough to touch.
If you use abrasive cleaners too vigorously
¡
or too often they may eventually mar the
enamel.
Do not clean in a self-cleaning oven.
¡
Avoid excess water on the igniter. A damp
¡
igniter will prevent the burner from lighting.
Remove any lint that may remain after
¡
cleaning.
Cleaning and maintenance en-us
23
Publicité
