Télécharger Imprimer la page

Gaggenau CG280212 CA Manuel D'utilisation page 11

Publicité

4.2 Control knobs
You can use the control panel to configure all functions of
your appliance and to obtain information about the
operating status.
The markings around the control knobs show the available
power levels. There are 9 power levels. If you turn on any
burner, the illuminated light around the control knob lights
up.
→  "Indicator on the illuminated ring", Page 11
Note: The image of the control knob is representative.
Depending on the available settings, the individual control
knobs may have some but not all functions described in
the following chart.
Knob position
0
Burner turned off
Electronic ignition
Power levels
9
Highest power level
1
Lowest power level
Burner positions
The markings next to each of the control knobs show
which burner they control.
Burner
positions
Front left burner
Front right burner
Middle burner
Back left burner
Back right burner
Indicator on the illuminated ring
Each control knob is encircled by an illuminated ring with
various display functions.
Display
No light
Lights up: Orange
Meaning
Burner turned OFF
Burner turned ON
Familiarizing yourself with your appliance en-us
Display
Flashing: Orange
Slowly flashing: orange
Dual flame burner control
For dual-flame burners, the inner and outer flames can be
controlled separately.
Power level
4.3 Burner cap and burner base placement
The burner caps must be properly placed for the cooktop
to function properly.
If the burner cap is not properly placed, one or more of the
following may occur:
Burner flames are too high
¡
Flames shoot out of the burners
¡
Stainless steel discolorations
¡
Burners do not ignite
¡
Burner flames light unevenly
¡
Burner emits gas odor
¡
WARNING
To prevent flare-ups do not use the cooktop without all
burner caps and all burner grates properly positioned.
CAUTION
To prevent burns, do not touch burner caps or grates while
hot.
Turn the cooktop off and allow the burners to cool.
Meaning
Appliance fault
Call Customer Service
Appliance OFF
Residual heat indicator
Meaning
Inner and outer flame on
full power
Outer flame on low power,
inner flame on full power
Inner flame on full power
Inner flame on low power
11

Publicité

loading