Double burner, first orifice
Double burner, second orifice
Fasten the orifices.
3.
Save the orifices removed from the appliance for future
4.
use.
5.3 Adjusting the gas valves
Turn the control knobs to position 0.
1.
Pull off the control knobs.
2.
Remove the screws at each burner and lift off the main
3.
top from the cooktop.
Note: Do not remove the illuminated rings under any
circumstances. You will require Customer Service to
refit them.
Remove the electronics pack from the control panel:
4.
With a flat head screwdriver carefully pry the black
‒
tabs at the front away from the panel one by one,
while lifting up the transparent cover of the
electronics pack to disengage the tabs.
When all tabs are unlocked you can lift off the
‒
electronics pack.
3
2
1
Remove the black disks from the valve stems. Make
5.
sure the springs underneath the black disks do not
come off.
Conversion to LP gas en-us
15