Publicité
Station Programming
Get the WVL App to get started!
16
The WVOM-E has no built-in controls, only LEDs to show status. All
programming and diagnostics are done with the free Bluetooth
WVL App, available for iOS
or Android
®
stores.
1.
Download and install the Hunter WVL App.
2. Open the app on a smartphone. The app will begin immediately
scanning for Wireless Valve Output Modules within a range of
roughly 15 m line of sight.
3. A list of available Wireless Valve Output Module devices within
Bluetooth range will appear, identified by serial number.
4. Select the Wireless Valve Output Module you're programming
and click Connect. The blue LED on the selected Wireless Valve
Output Module will light up when it's connected to the phone.
5. Consult the Wireless Valve Link installation guide for
programming station addresses into the Wireless Valve Links.
Note
The Hunter WVL App is designed for WVL programming
and diagnostics. There is no station manual operation
feature within the app.
For complete operational and troubleshooting information, visit
the Hunter Support pages.
SCAN
for help
hunter.help/WVL
from their respective app
®
Publicité
