Publicité
Additional Functions
Passcode Creation
• You can add a passcode (PIN) to the Wireless Valve Output
Module to prevent unauthorised access by other Bluetooth
smartphone users.
• It's important to remember your passcode or store it in a safe
place. If you forget or lose the passcode, other users may no
longer be able to access the Wireless Valve Output Module and
all the Wireless Valve Link information until it's bypassed. Do not
use a PIN that you use for other apps and functions.
Database Recovery
• The recovery feature is used when a Wireless Valve Output
Module must be replaced for service reasons or is exchanged
with another device.
• The new Wireless Valve Output Module must be relinked to all
the Wireless Valve Links in the field to operate.
• Install the new Wireless Valve Output Module, connect it with
the app, and choose the Recover Database feature.
• The app will prompt you to enter the serial number of a
known device (either a Wireless Valve Link or a Repeater)
within the system.
• The Wireless Valve Output Module will use this valid serial
number to search for the new device. The Wireless Valve Output
Module will then attempt to reach all operational Wireless Valve
Links or Repeaters within range. This can take up to 30 minutes.
• When the process is complete, a notification will appear.
If all Wireless Valve Links were found, the Wireless Valve
Output Module will be ready to irrigate again without further
field addressing.
30
Factory Reset
• The factory reset option will completely erase all Wireless Valve
Output Module information, including the Wireless Valve Link
database, Channel and Site ID assignments, and Repeater
configuration. The whole system will need to be set up again to
restore operations.
• From the WVOM-E Settings menu, select Factory Reset to
revert the system to default settings.
Firmware Updates
• Both the Wireless Valve Output Module and the Wireless Valve
Links can be updated in the field over the air (OTA), if new
firmware becomes available.
• When the process is complete, a notification will appear.
If all Wireless Valve Links were found, the Wireless Valve
Output Module will be ready to irrigate again without further
field addressing.
Publicité
