Télécharger Imprimer la page

Hunter WVOM-E Guide D'installation page 2

Publicité

Components
Table of Contents
2
Components
11
Installation
16
Station Programming
21
Basic Troubleshooting
30
Passcode Creation
30
Database Recovery
30
Factory Reset
30
Firmware Updates
39
Additional Functions
41
Compliance
Get the WVL App to get started!
2
You will need:
• Hunter WVL Bluetooth
®
App (free download from Apple or
Google Play)
• Two 9 V DC batteries for each Wireless Valve Link to
be connected
• Irrigation-grade, waterproof connectors for DC-Latching
Solenoid connections
• 38 mm hole saw for Wireless Valve Link valve box lid
mounting (included)
Note: Do not use the hole saw on the controller enclosure! The hole
saw is for installing the individual Wireless Valve Link devices in
valve boxes.
The Wireless Valve Output Module (domestic WVOM or
international WVOM-E model) is designed for installation in
an output module slot within a compatible Hunter ICC2 or HCC
Controller.
The Wireless Valve Output Module is designed to operate with
Hunter Wireless Valve Link devices only. It is not compatible with
any other manufacturer's devices.
The Wireless Valve Link requires Hunter DC-Latching Solenoids
(P/N 458200), which can be retrofitted to almost any existing
Hunter valve.
The Bluetooth word mark and logos are registered trademarks owned by
Bluetooth SIG Inc. and any use of such marks by Hunter Industries is under
licence. Apple, the Apple logo, and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. Google, the Google logo, Android,
and Google Play are trademarks of Google LLC.

Publicité

loading