Fitting The Harness; Balancing The Trimmer/Brushcutter - Stihl FS 55 Notice D'emploi

English

Fitting the Harness

The type and style of the harness
depend on the market.
The use of the shoulder strap is
described in the chapter on "Approved
Combinations of Cutting Attachment,
Deflector, Handle and Harness".
Shoulder strap
N
Put on the shoulder strap (1).
N Adjust the length of the strap so that
the spring hook (2) is about a hand's
width below your right hip.
N Balance the trimmer/brushcutter.
20
Full harness
N Put on the full harness (1).
N Adjust the length of the strap so that
the spring hook (2) is about a hand's
width below your right hip.
N Balance the trimmer/brushcutter.
Balancing the
Trimmer/Brushcutter
The type and style of the harness and
carabiner (spring hook) depend on the
market.
The carrying ring is integrated in the
control handle on loop-handled units–
see "Main Parts". Loop-handled units do
not need to be balanced.
Attaching the unit to the harness
2
1
2
N Attach the carabiner (1) to the
carrying ring (2) on the drive tube.
FS 55, FS 55 C, FS 55 R, FS 55 RC
1