Publicité
8.2
Configuration 2 - Room
thermostat
In configuration 2, the appliance is controlled
by a external thermostat (or programmable
thermostat) (not supplied), which switches the
appliance on and off depending on the set tem-
perature (Fig. 30).
When the temperature is satisfied, the thermo-
stat opens the circuit and switches off the stove.
The stove switches back on automatically when
the temperature falls below the value set on the
external thermostat (closed circuit).
66
T
6
22.15 20.3 °C
1
6
5
4
3
2
1
Fig. 30
This configuration can also be used to switch
the appliance on and off manually or in a pro-
grammed way (with the Timer function active);
to do this it is necessary to put the thermostat on
terminals 1 and 2 and remove the bridge.
If the thermostat allows scheduled
programming, to avoid overlapping
operation time slots, it is advisable to
deactivate the appliance timer by set-
ting it to OFF.
In this configuration the appliance
turns off when the external thermo-
stat is satisfied, or it will modulate the
power (to keep consumption to a mini-
mum) when the set room temperature
is reached.
004778882 - 28/09/2023
Publicité
