Publicité
• Fit the elbow (D) (Fig. 24)
• Remove the preform (G) on the back panel (A)
and insert the flexible hose (B) to connect it to
an outside air intake.
• Tighten the hose (B) with the previously loose-
ned metal hose clamp (F)
• Refit the back panel (A)
• Connect the flue gas pipe (E).
A
G
004778882 - 28/09/2023
ITALIANO
ENGLISH
E
F
B
D
Fig. 24
DEUTSCH
7.3
Levelling of the appliance
The appliance must be levelled with the help of
a spirit level, by regulating the adjustable feet
(Fig. 25).
A = Spirit level.
A
The image is purely indicative.
7.4
Room air circulation
The stove is designed for ductable rear hot air
connection.
In order to function correctly, the PRO
2 and PRO 3 models must be ducted.
In the event that ducting is not fore-
seen, it is necessary to:
• inhibit the operation of the fans by
electrically disconnecting them and
appropriately insulating their termi-
nals to avoid possible contact with
metal and/or hot parts
• close the unused outlets with the spe-
cial cap supplied as an accessory.
To connect the stove to the ducted heating
system, connect a pipe (B) to the rear fan (A) on
one side and to the air distribution outlet (C) on
the other side, securing it with a hose clamp.
When the stove is used to heat two or more
adjacent rooms, it is essential to encourage
recirculation of the ambient air to uniform the
temperature in the various rooms.
For air ducting, preferably use smooth,
internally insulated pipes.
FRANÇAIS
ESPAÑOL
Fig. 25
63
Publicité
