Publicité
6.6
Roof exhaust with traditional
fireplace
The chimney for the evacuation of flue gases
must be made by qualified personnel in compli-
ance with standards UNI 10683- EN 1856-1-2- EN
1857-EN 1443- EN 13384-1-3- EN 12391-1 both in
terms of the dimensions and the materials used
in its construction.
The flue gases can be evacuated through a tradi-
tional chimney (Fig. 19) provided the good condi-
tion and proper maintenance of the chimney has
been verified. In the case of an old chimney, it is
advisable to renew it using ducting.
The flue gas exhaust must be on the roof.
1) Wind-proof cowl
2) Seal
3) Inspect
60
If the chimney has a larger section, it
must be "intubated" with a suitably in-
sulated steel pipe (with diameter suita-
ble for the route (Fig. 20).
Make sure that the connection to the brickwork
chimney is properly sealed.
In case of pipes that pass through
wooden roofs or walls, it is recommend-
ed to use special certified ducting kits
commonly available on the market.
Fig. 19
1) Non-combustible material
2) Steel piping
3) Closing panel
Fig. 20
004778882 - 28/09/2023
Publicité
