Publicité
7
INSTALLATION
7.1
General considerations
In the following sections some indications are
provided to be complied with in order to obtain
the maximum performance from the purchased
product.
The following indications are how-
ever subject to compliance with any
possible national, regional and mu-
nicipal laws and regulations in force
in the country where the appliance is
installed.
7.2
Installation configurations
It is possible to install the stove in different ways
according to personal requirements:
• Coaxial pipe
• Single-wall pipe and air intake in room
• Single wall pipe and outside air intake
004778882 - 28/09/2023
ITALIANO
ENGLISH
DEUTSCH
7.2.1 Coaxial pipe
It is possible to use a coaxial pipe to expel the
flue gases and simultaneously recover the com-
bustion air since the stove has already a factory
configuration for this type of installation.
To achieve this:
• Connect the coaxial pipe (A) (Fig. 21).
A
While it is understood that it is the technician's
responsibility to properly size the chimney flue
based on the installation situation and the prod-
uct, it is nonetheless advisable not to exceed a
length of 7 metres with an 8/13 cm coaxial pipe.
FRANÇAIS
ESPAÑOL
Fig. 21
61
Publicité
