AVG IDAHO AVI-369IS2 Instructions D'installation Et Guide De L'usager page 26

OPERATING THE HOOD (continued)
Controls
(continued):
• Adjusting the timer function:
• While the blower is not running, press and hold Decrease (‐) button over 3 seconds to
enter timer mode. Adjust to desired period of delay off timer by pressing Increase (+)
or Decrease (‐) button (from a minimum of 1 minute to a maximum of 15 minutes). This
setting will be saved immediately.
• Activating the timer function:
• While the blower is running, press and hold Power button for over 3 seconds to activate
delay off timer. Power‐off delay indicator will lit up and Power‐off delay digital timer will
begin to countdown, when it reaches zero, the blower will shut down.
• Adjusting the light:
• Press Light button once to turn on the lights and once again to turn off the lights.
• While the lights are off, press and hold Light button for over 3 seconds to adjust the
lights to desired intensity. Level of brightness will be stored in the system's memory.
CAUTION: DO NOT touch the lights until they are switched OFF and cooled.
NOTE:
Light settings are independent from other settings (including power‐off delay) and lights have to be
manually turned on or off.
NOTE:
The system saves user configurations. Settings such as light, timer and blower speed will remain the same
the next time it is turned on.
26