Manufacturer; Ec Declaration Of Conformity - SystemAir MAXI 1100 Instructions D'installation

F

Manufacturer

Our products are manufactured in compliance with
applicable international standards and regulations.
The manufacturer hereby confirms that the following
products:
Air handling units
MAXI 1100 HW, MAXI 1100 EL
MAXI 1500 HW, MAXI 1500 EL
MAXI 2000 HW, MAXI 2000 EL
Comply with the following EC-directives:

EC Declaration of Conformity

as defined by the EC Machinery Directive
98/37/EEC, Annex II A. Fans for ventilation in air
handling systems with air from non-explosion
hazardous premises. This machinery must not be
put into operation until prior to reading mounting
instructions and safety information.
The following harmonized standards are in
use:
EN 60 034-1 Rotating electric machinery; ratings
and performances.
EN 60 204-1
Safety of machinery; electrical equipment of
machines; general requirements.
EN 292-1
Safety of machinery; basic concepts, general
principles for design.
EN 294
Safety of machinery; safety distances to prevent
danger zones reached by the upper limbs.
Remark: EN 294 only complies when fitted contact
safety device is part of the extent of delivery.
Systemair AB
Industrivägen 3
SE-739 30
Skinnskatteberg
SWEDEN
Office: +46 222 440 00
Fax: +46 222 440 99
EC Declaration of Conformity
As defined by the EC Low Voltage Directive
73/23/EEC and 93/68/EEC
The following harmonized standards are in
use:
EN 60 335-1
Electric domestic products and similar – safety-
general requirements.
EN 60 335-2-40
Safety of household and similar electrical
appliances - Part 2-40: Particular requirements for
electrical heat pumps, air-conditioners and
dehumidifiers.
EN 50 106 Electric domestic products and similar-
Safety-Instructions for control of manufacture.
Remark: EN 50 106 complies for internally wired
products only.
EC Declaration of Conformity
As defined by EC's EMC-directive 89/336/EEC,
92/31/EEC and 93/68/EEC
The following harmonized standards are in
use:
EN 61000-6-4: Electromagnetic compatibility (EMC)
- Part 6-4: Generic standards - Emission standard
for industrial environments.
EN 61000-6-2 Electromagnetic compatibility (EMC)
– Part 6-2: General requirements – Immunity for
appliances in industrial environments.
The complete technical documentation is available.
Skinnskatteberg, 11 Oct 2005
Mats Sándor
Technical Manager
3