Miele HS19 Mode D'emploi page 9

Technical safety

The vacuum cleaner operates at 25.2 V.
It is classified as a class II
class III appliance in its construction.
This appliance is supplied by a safety extra-low voltage
(SELV) power source where the voltage is low enough to
protect users from the risk of electrical shock. A Class II
charger is used for supplying power to charge the vacuum
cleaner.

Compare the connection data on the data plate of the
charger (voltage and frequency) with that of the electricity
supply. This data must match exactly. Without
modifications, the charger is suitable for 50 Hz and 60 Hz.

The electrical outlet must be fitted with a 16 A or 10 A
slow-blow fuse.

Check both the vacuum cleaner and all accessories
supplied with it for any visible signs of damage before use.
Do not use a damaged vacuum cleaner or damaged
accessory.

The Miele Multi Floor XXL Electrobrush and the Miele
Electro Compact handheld brush (varies according to the
model) are additional motor-driven devices designed
specially for this Miele vacuum cleaner. For safety reasons,
the vacuum cleaner must not be used with a different
Miele Electrobrush/handheld brush or an electrobrush/
handheld brush produced by another manufacturer.
en-CA - Warning and Safety instructions
appliance and is designed as a
9