Télécharger Imprimer la page

Miele HS19 Mode D'emploi page 27

Aspirateur-balai sans fil
Masquer les pouces Voir aussi pour HS19:

Publicité

 Lift the cover up as far as it will go b.
 Remove the roller brush that has been
fitted as standard c.
 Insert the Hardfloor Care soft roller.
 Close and lock the cover.
Electro Compact handheld brush
(Fig. 29)
(depending on model)
Follow the flooring manufacturer's
cleaning and care instructions.
Damage caused by trapped
material.
Risk of the flooring getting scratched.
Make sure that there is no coarse dirt
or debris trapped in the bottom of
the handheld brush, e.g., shards or
stones.
The handheld brush is particularly
suitable for intensive cleaning of car
seats and carpeted stairs.
For optimum cleaning results on
upholstery, use the upholstery nozzle
XL.
Useful tip: The suction tube is not a
convenient option for cleaning car seats
or stairs.
Useful tip: If you ever need to vacuum
up substantial amounts of coarse dirt or
debris, use the PowerUnit solo (see
"Installation and connection" – "Using
the PowerUnit solo").
Additional battery (HX LA)
(depending on model)
Using the additional battery doubles the
amount of time the vacuum cleaner can
be used for.
Before charging for the first time, you
must read the information in
"Installation and connection" –
"General battery information".
Battery charger cradle (HX LS)
(Fig. 30)
(depending on model)
Before charging for the first time, you
must read the information in
"Installation and connection" –
"General battery information".
When charging the battery for the first
time, you must use the PowerUnit. As of
the second charging operation, you can
use the battery charger cradle instead.
 Push the battery into the charger
cradle until it audibly clicks into place.
 Insert the plug into a power socket.
The charging process will start. The
battery charging state indicator flashes
on the left.
You can find out more about the battery
charging state indicator in "Installation
and connection" – "Battery charging
state indicator".
If you place the run-down battery in
the charger cradle straight after use, it
will only start charging once the
battery has cooled down.
The cooling process can take up to
60 minutes. The battery charging state
indicator on the charger cradle will not
respond during this time.
en-CA
27

Publicité

loading