Miele HS19 Mode D'emploi page 122

en-US - IMPORTANT SAFETY INSTRUCTIONS
Technical safety

The vacuum cleaner operates at 25.2 V.
It is classified as a class II
class III appliance in its construction.
This appliance is supplied by a safety extra-low voltage
(SELV) power source where the voltage is low enough to
protect users from the risk of electrical shock. A Class II
charger is used for supplying power to charge the vacuum
cleaner.

Compare the connection data on the data plate of the
charger (voltage and frequency) with that of the electricity
supply. This data must match exactly. Without modifica-
tions, the charger is suitable for 50 Hz and 60 Hz.

The electrical outlet must be rated at 15 Amps.

Check both the vacuum cleaner and all accessories sup-
plied with it for any visible signs of damage before use. Do
not use a damaged vacuum cleaner or damaged accessory.

The Miele Multi Floor XXL Electrobrush and the Miele
Electro Compact handheld brush (varies according to the
model) are additional motor-driven devices designed spe-
cially for this Miele vacuum cleaner. For safety reasons, the
vacuum cleaner must not be used with a different
Miele Electrobrush/handheld brush or an electrobrush/
handheld brush produced by another manufacturer.

Before and during use, make sure that no coarse dirt or
debris is/gets trapped in the bottom of the
Multi Floor XXL Electrobrush or in the bottom of the Elec-
tro Compact handheld brush (supplied depending on
model).
122
appliance and is designed as a