Dedicated Flash Functions - Metz mecablitz 64 AF-1 digital Mode D'emploi

• After a series of flashes with full power and
short intervals, a pause of at least 3 minu-
tes must be observed after each series of
20 flashes! !
• When taking a series of flash shots at full
light output and with rapid recycling times,
and with zoom positions of 35 mm and
less, the diffuser heats up, due to the high
level of thermal energy.
• This flash unit may be used in combination
with a camera-integrated flash only if the
flash can be folded out completely.

2 Dedicated flash functions

Dedicated flash functions are flash functions
that have been specially adapted to a given
camera system. Depending on the type of
camera, different flash functions are supported.
• Flash-ready indication in camera viewfin-
der/camera display.
• Automatic flash sync speed control.
• TTL flash mode
• Manual flash TTL exposure correction
• Preflash TTL and ADI metering
• Automatic motor zoom control.
• 1st or 2nd curtain synchronisation (REAR).
• Extended zoom mode.
• AF measuring beam control.
• Automatic flash range indication.
• Automatic HSS short sync for TTL and M
• Programmed auto flash mode .
• Wireless remote flash mode
• Servo mode.
• Spot zoom mode.
• Extended zoom mode.
• Wake-up function for the flash unit.
k
163