Range Display In M Or Ft; Flash Bracketing Series (Flash Brack.) - Metz mecablitz 64 AF-1 digital Mode D'emploi

11.7

Range display in m or ft

The range indication in the display can either
be shown in metres (m) or feet (ft).
Setting procedure
• Press the
for the selection menu to appear.
• Press the
touch display.
OPTION
• Press the
BEEP
touch display and select
m/ft
• Press the
POWERPACK
touch display.
m/ft
• Press the
m
touch display.
ft
The setting is adopted immediately.
D
button as often as it takes
OPTION
sensor button on the
sensor buttons on the
m/ft
.
m/ft
sensor button on the
m ft
or sensor button on the
11.8 Flash Bracketing Series
(FLASH BRACK.)
A series of flash exposures (flash-bracketing
FB) can be carried out in the TTL and automa-
tic flash modes. A flash bracketing series
consists of three successive flash shots with
different flash exposure correction values.
When a flash bracketing series is set, FB and
the correction value appear on the display.
The possible correction values range from
1/3 to 3 apertures in onethird aperture
increments.
Setting procedure
• Press the
for the selection menu to appear.
• Press the
OPTION
touch display.
O
• Press the
OPTION
touch display and select
AF BEAM
FLASH BRACK.
• Press the
the touch display.
p • Press the
q
touch display and select a correction value.
FLASH BRACK. O
• Press the sensor button on the touch
2/3
display for the selected correction value,
1
1
e.g.
1 1/3
p
q
D
button as often as it takes
OPTION
sensor button on the
sensor buttons on the
FLASH BRACK.
.
FLASH BRACK.
sensor button on
sensor buttons on the
.
k
197