Publicité
When "scan" has no display, the lock display mode is fixed on a certain function.
(2) Key function
Press the key to turn on the display.
When "scan" flashes, each function will be displayed one by one in turn. At this time, press
the button, "scan" will disappear, at the same time stop rotating display, enter the lock mode,
fix it on a function, and then you can press the key to select the function you want to display.
Long press for 2 seconds to clear all readings (except the total distance of ODO). The total
distance of ODO will not be reset as long as the battery has been powered.
(3) Precautions
When the movement stops and there is no key operation within 4 minutes, the electronic
watch will automatically close.
When there is motion sensing or press button operation, the electronic watch will
automatically open.
5. Maintenance & Troubleshooting
Daily maintenance
1. Please check whether the parts of this product are damaged or loose
regularly.
2. Regularly lubricate and maintain the connecting parts of rotating parts
and main parts.
3. Before each use, please check whether the armrest, cushion and other
parts are well fastened, and whether the foot part is loose. If it is loose,
please lock it in time. Replace the defective parts in time.
14
Publicité
