Publicité
5、Take out the electronic watch. 1. Take out the screw with the hexagon wrench, 2.
Take out the back cover and put in the battery. 3. Align the screw just taken out with
the hole and fix it with the hexagon wrench. 4. After the above steps are installed,
insert the induction wire into the electronic meter as shown in the figure
6、As shown in the figure, brake the ball head, turn the ball head clockwise, the
resistance of the exercise bike will increase. When the resistance is adjusted to the
maximum, if it continues to rotate, it will produce harsh friction sound, which is a
normal phenomenon),
otherwise, it will decrease. In case of emergency, please press the brake ball head
by hand, and the exercise bike will stop quickly to prevent injury.
12
Publicité
