Hatco Glo-Ray Série Manuel D'installation Et D'utilisation page 14

OPTIONS AND ACCESSORIES
Cutting Board (GRSSR Models only)
The cutting board comes equipped with rubber feet on the
bottom to center it on the unit.
The cutting board is made of the same material as the heated
stone surface and is available in the same colors.
Cutting Board
Cutting Board Dimensions
Model
GRSSR-16
(432 mm)
GRSSR-18
(483 mm)
GRSSR-20
(533 mm)
Cutting Board Dimensions
Width Depth
(A) (B)
17" 11-3/4"
(298 mm)
19" 13-3/4"
(349 mm)
21" 15-3/4"
(400 mm)
A
Risers (GRSSR Models only)
Steel risers are available to increase the height of GRSSR
units. They are available in 3" (76 mm) and 5" (127 mm) heights
in several colors and in stainless steel.
To install the riser:
1. Place the riser in the desired location on the countertop.
2. Thread the power cord of the GRSSR unit through one of
the access holes in the riser.
3. Set the GRSSR unit inside the riser. Make sure the controls
are accessible through the access holes in the riser.
B
14
Access Hole
Model GRSSR 5" (127 mm) Riser
Form No. GRSSM-1020
English