Publicité
1WD Attach the Rear Wheels
Inside of right rear wheel
Remove all the parts from the rear axle. Turn the vehicle body
upside down.
1.Slide the right rear wheel onto the rear axle from the left
side of the vehicle body, and make it match up with the motor
on the vehicle body.
2.Slide a Ø10 washer onto the rear axle.
3.Tighten a lock nut to the end of the rear axle with a
spanner.
08
Gear box
Rear Bottom View
4.Slide the Ø10 washer on the other side of the rear axle.
5.Slide the left rear wheel onto the rear axle.
6.Slide another Ø10 washer onto the rear axle.
7.Tighten a lock nut to the end of the rear axle with a
spanner. TIP: An extra spanner has been provided to hold the
Lock Nut on the other side of the rear axle while tightening
the Lock Nut on the other side.
8.Fit the hubcaps to the both rear wheels.
1WD Attach the Rear Wheels
EN
EN
Inside of left rear wheel
09
Publicité
