Publicité
4219-465-02821 MAN. GAG. MAGENTA Plus 120V EN-FR Rev 02.indd 27
Reinserting the brew group
1
Before placing the brew group back into the machine, make sure that the two
yellow reference marks on the side match. If this is not the case, perform the
following step:
Make sure that the lever is in contact with the base of the brew group.
2
Make sure that the yellow locking hook of the brew group is in the right
position.
To position the hook correctly, push it upwards to the highest possible position.
If the hook is still in the lower position, it means that it is not positioned correctly.
3
Reinsert the coffee residues drawer.
4
Reinsert the brew group into the machine along the side guides until it locks in
the right position with a click.
Warning: do not press the PUSH lever.
5
Close the service door.
English
27
16/04/2021 10:55:53
Publicité
