Equipment
Energy saving tips
Make sure the appliance is properly ventilated (see INSTALLATION).
►
Do not install the appliance in direct sunlight or in the near of heat sources (e.g. stoves,
►
heaters).
Avoid unnecessarily low temperature in the appliance. The energy consumption
►
increases the lower the temperature in the appliance is set.
Functions like Super- Freeze consume more energy.
►
Allow warm food to cool down before placing it in the appliance.
►
Open the appliance door as little and as briefly as possible.
►
Do not overfill the appliance to avoid obstructing the air flow.
►
Avoid air within the food packaging.
►
Keep door seals clean so that the door always closes correctly.
►
Defreeze frozen food in the fridge storage compartment.
►
The most energy-saving configuration requires the appliance keep drawers, food box
►
and shelves on factory-fresh condition, and food should be places as far as possible
without blocking the air outlet of the duct.
Ice cube make
28
1. Pour fresh drinking water into each ice-making box
as per the scale mark inside the measuring cup, do
not exceed the scale mark
Notice:
Do not bring water between the 2 buttons,
otherwise the buttons maybe frozen and the ice
cubes cannot drop into the storage box.
2. Put the box into the freezing compartment.
3. After water becomes ice, take off the ice maker out
of the appliance and rotate the button by hand.
Then, ice blocks will fall into the ice box auto-
matically. Remove the cover and fetch the ice cubs.
GB