Publicité
Attaching the Child Restraint (Sold Separately) to the Base
1.
Ensure that the base is securely installed.
NOTE: Ensure lower connector storage
compartment lid is secure over lower
connector storage prior to placing child
restraint (sold separately) into the base.
2.
Place the child restraint (sold separately)
into the base and press down until a click
is heard.
Pull up on both sides of the child restraint
3.
(sold separately) to verify attachment.
4.
Adjust the carry handle to the upright
locked position (Position 1) for use in a
vehicle and check that the recline angle
is still correct.
Removing the Child Restraint (Sold Separately) from the Base
Pull up and hold the lever on the back of the
1.
child restraint (sold separately).
2.
Lift the child restraint up from the base
using the carry handle.
21
Publicité
