Publicité
SilverCrest STV 50 G1
8.4 Oscillation
You can have the fan make horizontal movements (oscillations):
•
Press the OSC button (3) to the lower position to switch oscillation on.
•
Press the OSC button (3) again to switch oscillation off. The OSC button (3) toggles back to
the upper position.
9. Maintenance/cleaning
DANGER! Risk of electric shock!
• Unplug the fan from the mains before cleaning it.
• Never immerse the fan in water for cleaning.
• Do not put water or detergent directly into the fan.
Repairs are required if the fan has been damaged in any way, for example if the device housing is
damaged, when liquids or objects have penetrated into the fan or when the product has been
exposed to rain or moisture. Servicing is also necessary when the product does not perform normally
or if it has been dropped. If smoke, unusual noises or smells are noticed, disconnect the fan from the
mains immediately. If this occurs, the fan should no longer be used until it has been inspected by
authorised service personnel. All servicing work must be carried out by qualified specialist personnel.
Never open the housing of the fan.
•
You can remove major dust portions with a vacuum cleaner.
•
Only use a clean, slightly dampened cloth to clean the fan. Never use any aggressive liquids.
•
For stubborn dirt, add a little detergent to the damp cloth.
•
If necessary, you can also clean the protective grille with a soft brush.
10. Storage when not in use
If you do not use the tower fan (1) device for an extended period, clean it and store it in a dry and
dust-free place.
26 - English
Publicité
