Publicité
SilverCrest STV 50 G1
7. Before you start
7.1 Unpacking
•
Remove the product from the packaging.
•
Remove all package material.
•
Check the packaging for any missing contents. Please contact Customer Service immediately
if any items are missing.
7.2 Mounting
•
Figure A: Join the front (9) and back (10) half parts of the stand (8).
•
Figure B: First guide the power cable (13) through the stand (8). Then place the tower fan
(1) so on the stand (8) that the 4 locking catches (14) fit into the corresponding slots on the
stand (8). Furthermore, the plastic nose (see the arrow) of the rear half (10) of the stand has
to fit into the slot (see the arrow) on the tower fan (1). Next apply some pressure onto the
tower fan (1) so can hear the locking catches (14) click in place.
•
Always lay the power cord (13) under the stand (8), as shown in the following diagram:
24 - English
Publicité
