12.2 Handling the protection cage (Wox d 700)
• Open the protective cover (1).
• Insert the material to be cut.
• Close the protective cover (1).
• Swivel the rocking frame (2) with hand grip (A) or (B) to the saw blade and saw through the material to be cut.
• Swivel the rocking frame (2) back and open the protective cover.
• Add more material to be cut and close the protective cover again.
B
1
1
2
A
2
12.3 Commissioning Wox d 700sl
The Wox d 700sl provides maximum safety thanks to its enclosed sawing area.
Cut off the cable ties on the tension springs. Open the protective cover (1) and mount the tension springs as displayed in
the image.
24
GB
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58