installation
DeSCRIpTIoN of The ApplIANCe | RegUlATIoNS AND STANDARDS
2.
Installation instructions for the installer
The positioning, installation and commissioning must be
!
carried out by approved contractors in accordance with these
instructions.
Diagram A is referenced for explanation of the following text.
2.1 Description of the Appliance
Application
The Stiebel Eltron Vertical Solar Storage tank SBB ... Plus, in
combination with Stiebel Eltron's Solar Collector is an economical hot
water generator.
Connections
All connections (cold and hot) are readily accessible and allow for easy
installation.
Delivered condition
The hot water storage tank SBB ... Plus is wrapped in plastic and is
delivered on a one-way pallet. The storage tank has foam insulation, a
ABS outer casing and ABS cover.
A
G 1A
G 1A
G 1A
G 1A
12
|Sbb plus
P
O
17
G 1A
16
15
14
13
12
11
10
9b
9a
G 1A
Equipment level
»
Storage unit with two welded steel plain-ended pipe heat exchang-
ers
»
Hot water corrosion protection with special enamel coating
»
Thermometer 0 - 120 °C
»
Three immersion sleeves for housing of temperature probe and
thermometer
»
Magnesium Sacrifical Anode
»
Circulation Socket
»
Attached Flange inspection cover
»
PU Foam insulation 2.95 in. (70 mm.) thick
»
ABS outer casing with zipper in protective pouch
»
ABS Cover and Flange cover
Only for SBB 600 plus:
»
Removable polyurethane-side panels with fastening strap and
locking parts
1
2
3
G ½A
4
G 1½A
5
6
7
8
1
Sacrificial anode indicator
2
Glass lined steel tank
3
Thermometer well
4
Immersion sleeve for boiler
temperature probe
5
Spare port
6
Immersion sleeve for solar
temperature probe
7
Inspection port
8
Expanded polystyrene-
thermal insulation
9a Cold water inlet (SBB 300 &
SBB 400)
9b Cold water inlet (SBB 600
plus))
10 Solar inlet
11 Solar heat exchanger
12 Solar return
13 Heat exchanger from boiler
feed
14 Upper heat exchanger
15 Circulation port
16 Heater exchanger to boiler
return
17 Warm water outlet / T & P
relief valve location
www.stiebel-eltron-usa.com