Publicité
EN-18
2. Weigh the calibrated sinker submerged in the liquid with
the balance and the density determination kit. Lower the
calibrated sinker down into the liquid until it is fully
submerged (1 cm below the surface of the liquid).
3. When the * (symbol of stability) appears, press the
Function / Mode button to confirm the weight of the
calibrated sinker. The density of the liquid is displayed.
4. After completion of the test, press the Function / Mode
button to test a new sample.
4.5.5 Measuring the Density of Porous Material Using Oil
Press and hold the Function / Mode button until Density
appears. Press Yes to enter the Density Determination.
Item Settings:
•
Sample type: Solid
Auxiliary Liquid: Water
•
Porous Material: On
•
PX Series Balance
Publicité
