Publicité
en Basic settings
Setting
Water hardness
Statistics
Key tones
Start-up rinsing
How-to videos
Factory settings
Appliance information
Home Connect
1
Depending on the appliance specifications
2
Factory setting (may vary according to model)
64
Selection
1 (soft)
2 (medium)
3 (hard)
2
4 (very hard)
Water softening system
See selection on the ap-
pliance
2
Key tones on
Key tones off
Start-up rinsing off
¡
Start-up rinsing on
¡
The display shows a QR
code.
Full reset?
Continue: OK
Cancel: ←
Licence information
The selection depends
on the network status
and whether the appli-
ance is connected to
Home Connect.
Description
Set the appliance to the
local water hardness.
Display the number of
cups dispensed.
Switch the button tones
on or off.
Tip: Switch the "Start-up
rinsing" off if you are op-
erating the appliance
with the Home Connect
app.
The cup under the outlet
system is not filled with
rinsing water when the
appliance is switched on.
Scan the QR code and
watch instruction films
online.
Restore settings to the
factory settings.
Note: All individual set-
tings will be deleted and
reset to the factory set-
tings.
Display FOSS licence
text.
Select settings for
Home Connect.
→ "Overview of the
Home Connect settings",
Page 62
Publicité
