Publicité
2 Environmental protec-
tion and saving energy
2.1 Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
Sort the individual components by
▶
type and dispose of them separ-
ately.
2.2 Tips for saving energy
If you follow these instructions, your
appliance will use less power.
Set the interval for automatic switch-
off to the smallest value.
a If the appliance is not being used,
it will switch itself off earlier.
→ "Basic settings", Page 63
Do not interrupt the dispensing pro-
cess prematurely.
a The amount of water or milk that is
heated is used optimally.
Descale the appliance regularly.
a Limescale deposits increase the
appliance's energy consumption.
3 Installation and con-
nection
3.1 Scope of delivery
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
Environmental protection and saving energy en
Note: Different accessories are en-
closed depending on the appliance
model. This accessory is shown in a
frame with a dashed line.
→ Fig.
1
A
Fully automatic coffee ma-
chine
B
Milk container
C
Milk tube
D
Adapter for milk containers
E
User manual
F
Cleaning tablet
G
Descaling tablet
H
Water hardness testing strip
I
Water filter
1
Depending on the appliance spe-
cifications
3.2 Installing and connecting
the appliance
ATTENTION!
Risk of damage to the appliance. If
the appliance is not started up cor-
rectly, it may be damaged.
▶
Use the appliance in frost-free
rooms only.
▶
If the appliance has been transpor-
ted or stored below 0 °C, wait
3 hours at room temperature be-
fore starting it up.
▶
After plugging in, always wait ap-
prox. 5 seconds.
Place the appliance on a level, wa-
1.
ter-resistant surface that is capable
of bearing its weight.
Using the mains plug, connect the
2.
appliance to an earthed socket
that has been correctly installed.
1
1
1
1
49
Publicité
