Publicité
en operation
▶
Allow the hot milk system to cool
down before touching it.
Requirements
The milk container has been con-
¡
nected.
The milk container has been filled
¡
with sufficient milk.
Place your pre-warmed cup under
1.
the outlet system.
Press
repeatedly until the dis-
2.
play shows "Milk froth".
Change the setting if necessary:
3.
To adjust the per-cup quantity,
‒
press
.
→ "Adjusting the amount",
Page 59
Press
.
4.
The milk froth will run out of the
a
outlet system.
Press
to stop the dispensing
5.
process.
8.10 Dispensing hot water
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
▶
Never touch the milk system when
it is hot.
▶
Allow the hot milk system to cool
down before touching it.
Note: If the milk system has not been
cleaned, small amounts of milk may
be dispensed with the water.
Requirement: The milk system has
been cleaned. .
Place your pre-warmed cup under
1.
the outlet system.
Press
repeatedly until the dis-
2.
play shows "Hot water".
Change the setting if necessary:
3.
58
To adjust the per-cup quantity,
‒
press
.
→ "Adjusting the amount",
Page 59
Press
.
4.
Hot water will run out of the outlet
a
system.
Press
to stop the dispensing
5.
process.
8.11 Drink settings
Prepare a drink according to your
taste.
Adjusting the coffee strength
Press the symbol for your desired
1.
drink.
To select the strength of the cof-
2.
fee, press .
You can select the following coffee
strengths:
– "mild"
– "regular"
– "strong"
– "very strong"
– "doubleshot"
Note: The setting "doubleshot" is
not available for every drink and
drink volume.
Tip: For a strong taste of coffee,
select a high coffee strength when
setting a large capacity.
Selecting ground coffee
Press the symbol for your desired
1.
drink.
Press
repeatedly until the display
2.
shows "Gr. coffee".
→ "Dispensing a coffee drink made
from ground coffee", Page 56
AromaDouble Shot
You can make your coffee extra
strong by using the setting
"doubleshot".
Publicité
