Publicité
en Home Connect
Overview of the Home Connect settings
Here you can find an overview of the Home Connect settings and network set-
tings.
Basic setting
Wi-Fi
Appliance info
QR code
Connect to net-
work
Disconnect from
network
Connecting with
app
Remote start
11.4 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
Unique appliance identification
¡
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
Security certificate of the Wi-Fi
¡
communication module (to ensure
a secure data connection).
62
Selection
On
Off
-
-
Connect manually
Connect automat-
ically
-
-
Switch on remote
start
Switch off remote
start
Description
Switch off the wireless module during
long absences or to save energy.
Note: In networked standby mode
your appliance requires max. 2 W.
Display network and appliance inform-
ation
Press
and follow the information on
the display.
Reconnect the appliance to your
home network.
Note: You cannot operate your appli-
ance via the Home Connect app
without a network connection.
Connect the appliance to the
Home Connect app or additional
Home Connect accounts.
Switch remote start on the appliance
on and off.
Note: With the Home Connect app
only switch-off is possible.
The current software and hardware
¡
version of your appliance.
Status of any previous reset to
¡
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Publicité
