Open the lid.
1.
Add the milk.
2.
Close the lid.
3.
Insert the milk container on the left
4.
of the appliance.
The milk container will click into
a
place.
Tip
Fold open the lid of the milk con-
tainer, so more milk can be poured in
while the drink is being dispensed.
8.7 Dispensing coffee drinks
with milk froth
Requirements
The milk container has been con-
¡
nected.
The milk container has been filled
¡
with sufficient milk.
Place your pre-warmed cup under
1.
the outlet system.
Press the symbol for a coffee drink
2.
with milk.
The display will show the drink and
a
your current settings.
→ "Drink settings", Page 58
Change the settings where neces-
3.
sary:
To adjust the per-cup quantity,
‒
press
.
→ "Adjusting the amount",
Page 59
To adjust the coffee strength,
‒
press .
→ "Adjusting the coffee
strength", Page 58
Use the ground coffee compart-
‒
ment.
→ "Dispensing a coffee drink
made from ground coffee",
Page 56
Press
and wait until the pro-
4.
cess is complete.
After preparing the drink, the milk
system will automatically clean it-
self with a short jet of steam.
Tip: If you want to stop the dispens-
ing process early, press
want to stop the dispensing process
altogether, press
8.8 Dispensing special drinks
Your appliance has other drinks be-
sides the ones that you can obtain
via the quick-selection buttons.
▶
Press
several times.
→ "Drinks overview", Page 51
8.9 Dispensing milk froth
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
▶
Never touch the milk system when
it is hot.
operation en
. If you
.
57