Publicité
ENGLISH
Structure and equipment
Components common to all models
The main components of the device are:
• main body (1) already assembled which includes:
- Body with pre-assembled plug-in terminal block, frontal grille and aesthetic panel in polycarbonate (PC) tested
according to standard UNI EN ISO 11925-2:2010 and resulted in class E for reaction to fire (according to the
EN 13501-1 standard).
- Motor holder and push-button panel in ABS material.
- 5-speed reversible EC fan.
- Integrated electronic board.
- Closing device (disk) sealing the front panel to prevent temperature changes in the winter months and the
entry of pollutants and odors from the outside.
- Washable internal filter with frame.
• Flange (2) wall mountable with pre-assembled terminal block.
• Terminal block cover with screw and cable gland (3).
• PVC pipe for installation inside walls with thickness from 260 mm (283 mm VORT HRW 40 MONO EVO) to
700 mm (optional).
VORT HRW 30 MONO EVO
• Storage type heat exchanger, made of ceramic material with external filter already assembled (4A)
• External ventilation grille (d.100 T10 RB) in plastic material, externally mountable. Grid equipped with anti-
insect net (5A).
VORT HRW 40 MONO EVO
• Storage type heat exchanger, made of ceramic material supplied with two expanded polyproylene (EPP)
housings and it is complete with a central gasket to prevent air infiltration (4B).
• Outer rubber grille (5B), which can be mounted externally with plugs or inserted internally through the hole in
the wall with no need for external scaffolding.
• Washable external filter with holder grids (x2) (6).
• Anti-insect filter (7).
Assembling the anti-insect filter: Keep the cables tight and insert the filter inside the external grill by pressing
slowly (see Fig.13 n.6).
• Remote control (8).
VORT HRW 30 MONO EVO HCS / VORT HRW 40 MONO EVO HCS
VORT HRW 30 MONO EVO
(1)
(3)
(5A)
(2)
(4A)
(8)
(HCS models)
VORT HRW 40 MONO EVO
(1)
(2)
(4B)
(5B)
(7)
(8)
(HCS models)
(3)
(6)
Publicité
