Publicité
■
The mini die grinder should
only be adjusted, set or used
by adequately qualified and
trained operators .
■
This mini die grinder must not
be modified . Modifications
can reduce the effectiveness
of the safety measures and
increase the risks for the
operator .
■
Never use damaged ma-
chines .
Save all warnings and
instructions for future refer-
ence.
The safety instructions should
not be lost – give them to the
operator.
Work area safety
■
Keep work area clean and
well lit .
Cluttered or dark areas invite
accidents .
■
Slipping, tripping and falling
are the main causes of injuries
in the workplace . Watch out
for surfaces which could have
become slippery through use
of the machine, and also any
PDMS 6.3 A1
tripping hazards caused by air
or hydraulic hoses .
■
Proceed with caution in
unknown surroundings . Hidden
hazards caused by power
or other supply lines may be
present .
■
Do not work with the com-
pressed-air tool in areas sub-
ject to the risk of explosions,
or in areas where flammable
liquids, gases or dusts are
located . Grinding work creates
sparks which may ignite the
dust or fumes .
■
Keep children and other
unauthorised personnel at a
safe distance when using com-
pressed-air tools . Distractions
can cause you to lose control .
■
The grinder is not insulated
against electrical power
sources .
Safety information
■
Always wear eye protec-
tion when using or maintaining
the sander .
GB │ IE │ NI
│
5
■
Publicité
