Publicité
5. Copyright
All information contained in these instructions is subject to copyright and is provided for information
purposes only. It is only permitted to copy or duplicate data and information with the express and
written consent of the author. This also includes commercial use of the content and data. The text
and illustrations are based on the state of the art at the time of printing. Subject to change.
6. Prior to use
6.1 Inserting/replacing the batteries
To insert the batteries, remove the cover of the
battery compartment (4) at the rear of the bathroom
scales by gently pressing the ribbed area of the
battery compartment cover and then pulling it off.
Next insert the batteries supplied or replace the
batteries if they are empty. Always pay attention to
the polarity (note the + and – marks). The correct
polarity is labelled on the batteries and inside the
battery
compartment
compartment (4) cover back to its original position
until it clicks into place.
7. First use
7.1 Switching on the scales/measuring weight
The bathroom scales must be calibrated before first use or after having been
moved to ensure that they can determine one's weight exactly. To do so, step
briefly on to the tread (2), step off it again and wait until the bathroom scales
switch off automatically. The bathroom scales are now calibrated.
Due to the step on power function, the bathroom scales are switched on automatically when you
step on the tread (2) and they start to measure your weight immediately.
In their original state, the bathroom scales are set to the "kg" unit of weight. To change the unit of
weight, press the "Button for setting the unit of weight" (3). The selected unit of weight is then
indicated on the LCD display (1).
Stand on the tread (2) of the bathroom scales so that your weight is evenly distributed. Remain as
still as possible during the weighing process as the measurement result may be distorted otherwise.
(4).
Slide
the
battery
SilverCrest SPWES 180 A1
English - 7
Publicité
