MINN KOTA CORDED FOOT PEDAL Manuel Du Propriétaire page 4

INSTALLATION
INSTALLATION
Installing the Foot Pedal
1
ITEM(S) NEEDED
a. Take the Foot Pedal (Assembly #A) and turn it over.
Put a Foot Pedal Pad (Item #2) in each of the
pad locations.
Adding the Foot Pedal pads is optional. The
NOTICE:
pads are recommended when using the Foot Pedal on
non-carpeted surfaces.
2
b. Locate the Foot Pedal Power Cord that exits the
Mount of the trolling motor, next to the Power
Cables. Unscrew the Cap on the Plug at the end of
the Foot Pedal Power Cord.
c. Locate the 4-Pin Plug from the Foot Pedal and
unscrew the Cap.
d. Align the 4-Pin Plug from the Foot Pedal with the
Plug from the trolling motor. Firmly push the Plugs
together. Secure the connection by rotating
the collar on the Foot Pedal Power Cord in a
clockwise direction.
The connectors are keyed to prevent
NOTICE:
reversed installation.
When the Foot Pedal Power Cord is not in use,
NOTICE:
ensure that the Cap is on and firmly secured.
4 | minnkota.johnsonoutdoors.com
#A x 1 #2 x 4
2b
2c
2d
Foot Pedal Foot Pedal
Bottom Bottom
Foot Pedal Foot Pedal
Pad Placement Pad Placement
Power Cables Power Cables
Foot Pedal Foot Pedal
Power Cord from Power Cord from
Trolling Motor Trolling Motor
4-Pin Plug from 4-Pin Plug from
Foot Pedal Foot Pedal
Plug Plug
Cap Cap
Foot Pedal Power Cord Foot Pedal Power Cord
from Trolling Motor from Trolling Motor
©2023 Johnson Outdoors Marine Electronics, Inc.
4-Pin Plug from 4-Pin Plug from
Foot Pedal Foot Pedal