MINN KOTA CORDED FOOT PEDAL Manuel Du Propriétaire page 3

INSTALLING THE ULTERRA & RIPTIDE ULTERRA FOOT PEDAL
The new Corded Foot Pedal accessory comes with everything needed to install it to the trolling motor. These instructions show how to
install the Corded Foot Pedal to an Ulterra or a Riptide Ulterra. Please review the parts list and mounting considerations for installation
prior to getting started. For additional product support, please visit minnkota.johnsonoutdoors.com.
INSTALLATION PARTS LIST
Item /
Part # Description
Assembly
A 2994743A FT PEDAL ASM ULTERRA 1.5 ACC.
B 2994859 BAG, ASY-TERROVA/V2, RUB BUMPERS
2 2325110 PAD,FOOT PEDAL PD
2207117 INSTRC.SHEET,ULT. FT.PED. ACC.
p
p Not shown on Parts Diagram.
MOUNTING CONSIDERATIONS
When placing the Foot Pedal on the boat, select a location that is appropriate for trolling motor operation and will not obstruct boat use.
Place the Foot Pedal in a foot pedal well on the boat, if applicable, or any location where it will be free from water and debris.
©2023 Johnson Outdoors Marine Electronics, Inc.
INSTALLATION
Qty.
1
1
5
1
A A
B B
2 2
minnkota.johnsonoutdoors.com | 3