MINN KOTA CORDED FOOT PEDAL Manuel Du Propriétaire page 13

HOW SPOT-LOCK WORKS
Spot-Lock uses a single point of reference that is recorded when the Spot-Lock
coordinates captured at the location of the trolling motor at the moment the button is pressed. This point is recorded and can be saved
into one of the Spot-Lock memory locations. Spot-Lock works by recognizing the GPS coordinates and will automatically navigate the
boat to keep it at the Spot-Lock location. If the motor recognizes it is not positioned at the Spot-Lock location, it will control motor speed
and direction in an attempt to keep the motor on the Spot-Lock. For more specific instructions on using Spot-Lock, refer to the paired
remote Owner's Manual online at minnkota.johnsonoutdoors.com.
Spot-Lock is based on the location of the trolling motor, not on the location or direction of the boat. Outside forces such as
NOTICE:
wind and current will cause the boat to move. Spot-Lock will navigate to maintain the motor on the Spot-Lock location, regardless of
the position of the boat.
Watch for a turning Prop when working with Spot-Lock. The Prop will automatically turn on when Spot-Lock is engaged, even if the
engagement is accidental. A turning Prop can cause injury. The Prop will turn "on" for Spot-Lock, regardless of the Prop Auto On setting
used on other control methods.
Indicator Panel Indicator Panel
Spot-Lock Spot-Lock
Foot Pedal Foot Pedal
The Spot-Lock button will only work on trolling motors equipped with Spot-Lock. If the Foot Pedal is used on a motor
NOTICE:
without this feature, the Spot-Lock button will be non-functioning.
©2023 Johnson Outdoors Marine Electronics, Inc.
SPOT-LOCK
WARNING
Spot-Lock Spot-Lock
Button Button
button is pressed. The reference point is a set of GPS
Spot-Lock Spot-Lock
Wind/Current Wind/Current
minnkota.johnsonoutdoors.com | 13