Charging The Battery; Toothbrush Heads - Nevadent NZAOD 600 A1 Mode D'emploi

6. Charging the battery

NOTES:
• Fully charge the battery before using it
for the first time.
• It takes approx. 16 hours to fully charge
the battery.
• Place the toothbrush 6 on the peg 8 of
the battery charger after use. This en-
sures that the toothbrush 6 always
works at full power. The battery is not
damaged by regular charging.
1. Plug the mains plug 10 of the battery
charger 9 into a suitable wall socket.
The wall socket must still be easily acces-
sible after connection.
2. Place the switched-off toothbrush 6 onto
the peg of the battery charger 8.
The charging indicator light 12 is lit red
throughout the entire charging process.
When the optimal charging state has
been reached, the charging indicator
light 12 turns green.
Battery signals: charging
indicator light
Toothbrush 6 on the battery charger 9:
- Charging indicator light 12 is lit green:
the battery is fully charged.
- Charging indicator light 12 is lit red:
the battery is being charged.
Toothbrush 6 switched on:
- The toothbrush 6 switches itself off and
the charging indicator light 12 flashes
red: the battery is weak. Charge the
battery.
12

7. Toothbrush heads

The items supplied include 4 toothbrush
heads 3.
The various marking rings 4 allow you to as-
sign the toothbrush heads 3 to different fam-
ily members.
• Take a toothbrush head 3 and slide it
onto the shaft of the toothbrush 5.
• In order to remove, carefully pull the
toothbrush head 3 off upwards.
• Figure B: the indicator bristles 16 on
the brush head 2 slowly lose their col-
our during use. The decolouration
shows when the toothbrush heads 3
should be replaced.
NOTE: we recommend that you replace the
toothbrush heads 3 every 3 months or after
infections (see "Ordering toothbrush heads"
on page 11).
7
GB